REQUIRED TOOLS & SUPPLIES

x-acto zap-a-gap



  • SMALL FILES from the hobby shop: I recommend at least a flat and a round one.
  • HOBBY KNIFE with one or two types of blades: in case of an X-Acto knife #1, #11 and # 10 blades are recommended.
  • TWEEZERS can be sueful for picking up and positioning small parts.
  • SMALL PLIERS (like the kind in a Swiss Army Knife) will allow you to easily push the axles through the wheels.
  • WOODEN TOOTHPICKS for applying glue.
  • C/A GLUE ("krazy glue"): I prefer Zap-A-Gap CA+ for most applications. This is a gap-filling glue that allows repositioning of parts.
  • EPOXY RESIN (1 minute or 5 minute version) can be useful for reinforcing parts and for filling gaps, but is not required.
  • PUTTY: I like Bondo putty from the auto parts store. It is inexpensive and very good.
  • SANDPAPER (600 grit) for sanding putty.
  • PAPER NAPKINS to wipe off excess glue and spills.
Please read all instructions, labels, and safety warnings  pertaining to tool and material use. Tools can be dangerous and materials can be toxic. Use common sense, work under good lighting conditions and with proper ventilation. Wear and use appropriate safety gear like goggles, dust masks, and gloves as necessary.

I am not responsible for any harm that comes to you through use of tools, materials, and my model kit.